22
•
EN
The blinds can be controlled only by means of a remote control or an application.
COOLING
Cooling is the default operating mode of the device, which is activated when the "
J
" button
is pressed after switching the device on.
The device remembers the last setting of temperature and fan speed before power off by
pressing the "
J
" button (the device returns to the factory settings after disconnection from
the power supply).
If another mode is activated, cooling is also switched on with the "
I
" button.
Cooling is indicated by the "
O
" indicator light.
The display "
E
" shows the temperature pre-set within the range 16°C to 31°C.
Use the "
C
" and "
H
" buttons to set the temperature.
The fan speed can be set by pressing the "
B
" button.
When using the dehumidification mode, the pipe discharging the air to the outside must
be connected to the unit to.
DEHUMIDIFICATION
Switch on the device with the "
J
" button.
Press the "
I
" button once.
The display "
E
" shows the "
dh
" symbol.
The humidity level is constant - it cannot be changed.
The fan operates only at "
F1
" speed.
When using the dehumidification mode, the pipe discharging the air to the outside must
be connected to the unit.
FAN
In this mode, only the fan of the device works.
Switch on the device with the "
J
" button.
Press the "
I
".
The "
FA
" symbol appears on the "
I
" display.
Activation of the function is indicated by the indicator light "
R
"
The fan speed (
F1, F2, F3
) is set by pressing the "
B
" button.
To switch off, press the "
I
" button (change of operating mode) or the "
J
" button (switching
off the device).
SLEEP
Night mode only works in conjunction with the cooling mode.
The night mode is activated by pressing the "
T
" button on the remote control or by pressing
the "
B
" and "
C
" buttons simultaneously. Activation of the function is indicated by the "
F
"
indicator light. The display "
E
" shows the pre-set temperature. The fan operates only at "
F1
"
speed. To deactivate the mode, press the "
T
" button again on the remote control or the "
B
'"
and "
C
" buttons simultaneously.
START DELAY
The device must be switched off, but connected to the power supply.
