Colortronic CTT 1200, Operating Instructions Manual

Page: 26 / 96

3.5.3. Entering hopper values
Select ”Hopper” .
Acknowledge with the ENTER-key.
or
Press the ”F4” -key.
Hopper entry #
Enter the drying hopper number whoose value you want to view or modify. Acknowledge with the
ENTER-key.
Hopper entry Target
Enter the drying temperature for the drying hopper (when operating with supplementary heating).
Acknowledge with the ENTER-key.
Hopper entry Act.
The current temperature at the feed opening of hopper flap will be displayed.
&
If there is a cable break “+0 °C” is displayed.
F
The lowest drying temperature setting of the hopper flap must be the
same as or higher than the drying temperature.
Name TT: ########
Display of drying hopper (TT) name.
Press the “
â
” key.
64.10-8279GB02
05/03
CTT 1200
Start-up 3-11