Play and Save Scene and ColorRoll
Scene and ColorRoll patterns are played and saved in the same way. A scene stores all 8 fixture colors and
a ColorRoll stores all 8 fixture colors but stores them in a pattern which is then sent to a single fixture. The
fixture then rolls through all the 8 colors continuous loop until the user stops the ColorRoll. Lets start with
scene Record and Playback.
Scene Record
Set all 8 fixture to a desired color by using the RGB Up/Dn keys or 1 of the presets. After all 8 fixtures are
set
PRESS and HOLD
the Save key then press the Scene button. Now released both buttons. The scene is
now saved. Scene is stored in memory, turning off the remote or changing batteries will not affect the stored
data.
Scene Play
To play the scene just press the scene button and all 8 fixtures will transition to the previously stored scene.
If the ColorCue is set to Snap the fixtures will instantly turn to the saved scene. The indicator will turn green
during the color transition and the RGB UP/DN buttons will be disabled.
When a scene has been sent to the fixtures the colors of each of the fixtures can be edited by using the RGB
UP/DN buttons or 1 of the 16 presets.
www.ColorMaker.net
Summary of Contents for ColorCue-PX
Page 1: ...ColorCue PX User s Manual...
