www.colorlightinside.com
9
5.2.1 Sending Device Setting
[Select Sending Device]
for
[Sender]
, and
detect
senders.
Sending Device Setting
includes 5 parts:
Source Setup
,
Control Area
,
EDID
,
Other
,
Detect Receivers
.
1.
Source Setup
①
Signal Source
When the input signal source of X4e is normal, the upper right of the software interface
will display the input signal information auto acquired via the software. Users can select
specific signal source (HDMI/DVI/SDI1/SDI2/DP) according to needs in
[Main]
; If PIP mode
has been open, users can also select specific signal source (HDMI/DVI/SDI1/SDI2/DP) in
[PIP]
. At the moment, the image of selected signal source will display in the
Image View
Area
on the left of the software interface.
②
PIP
There are three output modes of main image and PIP in
[Output Mode]
, users can
select specific PIP mode based on the requirement, and conduct the operation like move,
scaling and cropping on the main image and PIP image respectively.
Summary of Contents for X4e
Page 1: ...X4e Controller...
Page 6: ...www colorlightinside com 4 3 Signal Connection...
Page 29: ......
