28
6.3.9 Tiles Mapping
Select
Tiles Mapping
to enter the
Tiles Mapping
submenu.
In the submenu, press the knob/
OK
to turn on or off
From Sender
. If
From Sender
is
turned on, the sender is set as the connection source. Then select
Set by Port
to enter the
submenu, in which you can choose the Ethernet port from 1 to 20 that needs setting
mapping, and set the row offset value(
X
) and column offset value(
Y
) of the port, and the
width, height, row number, column number and link type of the corresponding cabinets.
Finally select
Save
to save the mapping.
6.3.10 Output Shift
Select
Output Shift
to enter the
Output Shift
submenu.
Summary of Contents for X20
