Colorlight X12 Instructions Manual Download

Page: 19 / 26

5.3.1 Display Setting

Rotate the knob and select

Display Setting

to enter the

Display Setting

submenu.

Broadcast

Press the knob/OK to turn on or off the

Broadcast

function. If the broadcast function of

the cascading devices is turned on, you can synchronously control all cascading devices by

setting the functions below the

Broadcast

menu item on one device.

Brightness

Select

Brightness

, rotate the knob to change the brightness, and then press the

knob/

again to save the brightness.

CCT

In the

CCT

menu, you can press the knob/

to turn the color temperature adjustment

function on or off. If

Enable

is turned on, you can select

CCT

and rotate the knob to change

the value of color temperature, or select

Reset to Default

to reset the value of color

temperature as 6500.

Black

Press the knob/

to turn on or off the LED screen.

Freeze

Press the Knob/

to freeze or unfreeze the LED screen.

Better Gray

Press the Knob/

to turn on or off the

Better Gray

function.

Summary of Contents for X12



























Search results

Summary of Contents for X12

Reviews:

Related manuals for X12

Brands by name

Popular brands

Colorlight X12, Instructions Manual

Search results

Summary of Contents for X12

Reviews:

Related manuals for X12

Brands by name

Popular brands