User Manual
Fig.5-4
Sender Card Resolution:
In general, it should be consistent with graphics cards
Input Signal Information:
Software will automatically collect parameter from the
sender card.
Advanced Settings:
This feature is only for professional and technical personnel
to set up special applications, nonprofessional personnel are not allowed to operate. It
contains the following parameters setting in Advanced Settings.
3D Setting:
Q7H is no need to set this item because only for 3D Sender
feature setting.
Write Logo:
Can be written to the customer specified image such as logo,
and display before the video signal is not input.
Zero Frame Delay:
Enabled by the professional and technical personnel
or it will display abnormally.
Auto Switch (DVI, HDMI):
The transmitter only identifies the set of
video signals when selected; the signal of the first access can be
automatically identified when not checked.
Adjust Brightness Based on Multi-function Card:
Check it if you
need multifunction’s light sensor automatically adjusts the LED screen’s
brightness.
Network Date Types:
The software default is “Standard Frame”; please
www.colorlight-led.com Version: V1.0 2015/11/26
