Page | 36
IRISJET PRO
Note
: If nozzles are found blocked even after normal purging, then try the
powerful purging (“P” switch in
purging board has to be kept pressed for few seconds and then required color switch has to be pressed).
Head Spraying
Head spraying clears the mixing of colors during blotting, may also clear few dry nozzles. When heads are
sprayed, all the nozzles are actuated at a high rate which helps in opening up few dry nozzles of the printer.
To perform head spraying,
click
on the
Spray
button available under the
Quick Access Toolbar
, as shown
below:
Fig 47: Displaying the Spray Button
