Page | 32
IRISJET PRO
Ripping and Printing
Ripping is an independent process which converts a raw image file into the machine-readable format and
get the file ready for printing. The Rip software supports the tiff, jpeg, eps, psd, bmp file formats. After
ripping the image file, the output file will be in
“.prt”
or
“.prn”
file format. Thus, you should first rip the
image file before printing and then issue the Print command. While ripping, the color profiles are used to
automatically perform the color corrections in the image. Now, you can print an image on the selected
media simply by clicking on the
Print Job
button available on the
Quick Access Toolbar,
as shown below:
Fig 41: Issuing the Print Job Command
After issuing the Print command, the printing gets started and its progress details displays in the Job
Information area, as shown below:
Fig 42: Displaying the Printing Details
DPI and Print Mode
Table 3: Displaying the DPI and Print Mode
Print Mode
DPI
Mode 1
360 X 360
Mode 2
360 X 540
Mode 3
360 X 720
Mode 4
720 X 360
Mode 5
720 X 540
Mode 6
720 X 720