Figure B
PWR
DMD_IN
USB Port
Figure C
WPC95
Mounting
Holes
WPC95
Mounting
Holes
To protect against electrical shock,
ground wire from the backbox must
be connected to this metal bracket.
Ground wire
attached here
Position the ColorDMD face down in the orientation shown in
Fig. B on the speaker panel and align the four WPC95 mounting
holes (see Fig. C).
Remove the protective film from the front side of the new
ColorDMD display.
Use the four original DMD screws from Step 3 to fasten the
ColorDMD display to the speaker panel. If one of the screws is
attached to the ground wire from the backbox, ensure that the
ground wire is making good contact with the ColorDMD metal
bracket (see Fig. C).
4
5
6
STEP
STEP
STEP
!
WARNING - ELECTRIC SHOCK
WARNING
.
Electric Shock Hazard
- To protect against
accidental electric shock,
DO NOT
operate the game without
ensuring that the ColorDMD metal bracket is electrically grounded.
ALL RIGHTS RESERVED - US PATENT 8,773,452 B2 - COPYRIGHT 2016 - COLORDMD DISPLAYS LLC
