4
1. Open the bag slot and put a roll of bag into
the slot. Put its hook face down and do not
close the transparency cover for the moment
to avoid getting the bag stuck when opening
the cover.
2. Uplift the cutter bar and draw the roll bag
under it.
3. Draw the roll bag to the suitable length to
make sure that it can pack the food as you
like. Press the cutter bar, slide the cutter for
one side to another and a bag with two
unsealed mouths comes.
4. Put either one side of the bag onto the
sealing strip. The bag mouth should not
exceed the gas nozzle. Then lock the lock
catch and press “SEAL”. After the vacuum
indicator light is on and five progress indicator
lights are on gradually, there are three tinkles
ringing. Sealing is done after only one
progress indicator light is on. Open the
machine and the vacuum bag is sealed.
5. After completing the above steps, you will
have a vacuum bag with one sealed mouth
and the other unsealed one.
Summary of Contents for CLV?-36
Page 3: ...2...
