4
Before use
1. Read all instructions.
2. Check the voltage of your juicer before plugging it in. Before plugging in, ensure switch is
off.
3. Wash all parts and components that are in contact with the juice. Flush them with water
and then dry them.
How to operate
1. Cut the fruit in half
2. Place a cup under the spout.
3. Plug in the socket. Switch to the position “1”. Align the center of the cut fruit with the top of
juicer head and put it down. Press the handle to make the juicer head rotate. Impose even
pressure until juice is flowing out (see Fig.2). Then take out the peel and place the other cut
fruit. Repeat the above operation. Pay attention to clean the pulp in the filter to avoid overflow
of pulp.
4. Switch to the position of “0” when you stop using the appliance. Pull out the plug.
Don’t press too tight. If you hear that the motor is rotating more slowly or that it stops, it means
that you are pressing too tight. The motor will not become damaged because the thermal
protective device turns the motor off in case of over-straining. If this occurs, we advice you to
turn the juicer off, using the on/off switch. After a few minutes, the motor will cool off and the
juicer can be used again. Make sure to always switch off the juicer after use.
Cleaning
Never use steel wool abrasive cleaning ball or erosive liquid (such as alcohol, gasoline or
acetone) to clean the appliance.
1. Always switch off the motor and unplug the juicer.
2. Never immerse the motor housing in water. Wipe it with a damp cloth to clean it and wipe it to
dry it.
3. It is easy to detach all parts and components that are in contact with juice, such as juicer
head, filter, juice bowl etc, rapidly. Bowl pressing assembly shall be detached in
counterclockwise direction holding the handle. It is quite sharp on the bowl edge; pay more
attention to avoid scratches to your hands. When assembling the bowl pressing assembly, note
to ensure the bowl is always in contact with the bench. Screw up in clockwise direction. Please
operate carefully to avoid scratches in your hands.
4. Rinse all parts that are coming into contact with the juice immediately after use.
5. Make sure that you wash all parts that are in contact with the juice before using the appliance
for the first time.
