2
Overview for setting up and using the Dolphin System:
1.
Confirm that your meet management software supports Dolphin, and is installed on
the computer you will be using. If it is not, follow the software provider’s instructions
for installing it.
2.
Install the Dolphin software from www.coloradotime.com/dolphindownload. Refer to
Software Installation on page 3.
3.
Configure your meet management software to use the Dolphin System. Refer to
beginning on page 3 for details.
4.
Set up the Dolphin hardware the way you will be using it. Refer to
beginning on page 4.
5.
At least a day before the first meet, practice with the Dolphin system so you are
familiar with what to do. Refer to the Computer Operator Instructions (page 6),
Starting Official Instructions (page 12) and Lane Timer Instructions (page 13). You
may also find the Troubleshooting section useful (page 15).
6.
Note that there are separate instruction sheets for the Starting Official and Lane
Timers, and a sheet of Dolphin Basics. These instructions describe only what each of
those individuals need to do with their part of the Dolphin system. Many facilities
find it useful to print extra copies of these pages to use in training those individuals.
This manual was loaded on your computer (CTSDolphin\DOCS folder) when you
installed the software. The most recent version is available on our website
(www.coloradotime.com), in the customer service section.
Summary of Contents for Dolphin
Page 1: ...User Guide F912 Rev 201710 For Dolphin version 4 3 ...
Page 4: ......
