13
Lane Timer Instructions
You need to know if your facility is using a Synchronized Start or a Wireless Manual Start.
Follow the directions below for the one your facility is using.
Synchronized Start (from Electronic Start System or Dolphin
Starter)
Note: what you do with your watch is transmitted wirelessly to the meet management
computer. Please follow these instructions so that the information received for your lane is
correct.
1.
The Starter will start all watches.
2.
Press one of the side buttons to stop your watch (use whichever is most comfortable
for you).
3.
IF YOU HAVE BEEN ASKED TO TAKE SPLITS, press one of the side buttons one
time for each split. Your watch will display the split time for about 2 seconds, and
then show the running time again.
4.
You should not press any other buttons, unless you are blanking your lane (see
below).
Note: If you take too many splits (this includes taking one or more splits in a race or event
which is not recording splits), your watch screen will display the split time and won’t
automatically display running time after 2 seconds. The watch is still recording running
time, and will display it once you press one of the side buttons again, as long as the Starter
has not pressed Reset.
When the Starter has reset all the watches in preparation for the next race, the bottom line on
your watch will show “RESET,” alternating with the time. Also, the watch icon on the top
row will be displayed while time is running on the watch, and will disappear when the Starter
has reset all the watches for the next race.
Summary of Contents for Dolphin
Page 1: ...User Guide F912 Rev 201710 For Dolphin version 4 3 ...
Page 4: ......
