two, three or more devices are addressed similarly, they will work similarly.
Press the menu button until it shows AXXX in the display. XXX is the address you se last
time. Press UP or DOWN button to select your desired address, etc, A001. Press ENTER
button to save or press MENU button to exit.
.
Thermal shrink tube
Waterproof purpose(Auto-adhesive)
REPE ATE RS
D M X- RE-11
DMX CONROLLER
WASHER 2(ADD:4)
WASHER 32 (ADD:97)
WASHER 4 (ADD:10)
WASHER 3 (ADD:7)
WASHER 1 (ADD:1)
WASHER 33 (ADD:100)
WASHER 34 (ADD:103)
WASHER 34 (ADD:106)
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an electrically
noisy environment, such as in a discotheque, it is recommended to use a DMX terminator.
This helps in preventing corruption of the digital control signal by electrical noise. The
DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2
and 3,which is then plugged into the output XLR socket of the last fixture in the chain.
Please see illustrations below.
Power Cable joint (at most 4pcs), Signal joint (at most 30pcs), XL-3R, at first, use the
high voltage and waterproof adhesive tape with mucosa to enlace the joint one circle.
After stretch the adhesive tape, then you can enlace it, please reference the operation
describe.), then cover a 20mm cannula with pyrocondensation.
At last, envelop the joint to reach a waterproof effect.
Warning:
Warning:
Warning:
Warning:
If this joint can’t don't’ do the waterproof manage, Then the amp waterproof
will
be invalid, and then destroy the product.
Notice:
Notice:
Notice:
Notice:
In order to avoid overloading the power supply, the power
cccc
ord for each power
supply series with light can not be more than 4pcs.
6.
6.
6.
6. Operations
Operations
Operations
Operations
Auto
Auto
Auto
Auto Operation
Operation
Operation
Operation
Press the MENU button until it shows one of the following
：
- FLAS: strobe effect
- FADER: fade in and fade out effect
- ASC-: automatic color change effect
Press UP or DOWN button to select one of them,
the device will be operated automatically with built-in programs
Press ENTER button, the last two digits in the display will show 00-12. This is the
speed or different built-in programs.
Press UP or DOWN button to select.
Press ENTER button to save or press MENU button to exit
