e-mark create marking device
Chapter 1 Introduction
CODI Standard 1.0
7/60
Operating and Maintenance Manual
1.2 Liability
The details in this documentation describe the properties of the product without assuring those properties.
No liability is accepted for damages that arise from:
Unintended use of the product.
Failure to follow the documentation.
Improper work on and with the product.
Operating the product while in a defective condition.
Defective monitoring of parts of the product that are subject to wear.
Improperly conducted repair work.
Unauthorized modification of the product.
Natural disasters, the action of foreign bodies and force majeure.
1.3 Intended use
The COLOP e-mark create, hereafter referred to as e-mark create, is a battery-operated mobile marking device. The
device can be operated by smartphone, tablet or stationary computer. It can make imprints directly on a variety of
absorbent surfaces including paper or cardboard. The e-mark create is suitable for making individual imprints and for
occasional multiple use.
The multicolour ink cartridge (CMY) uses inkjet technology. Surface navigation and/or speed control is managed by
an optical sensor. The printing content is sent to the device directly from an application (app) or computer software
(SW). Transfer is via a WIFI connection from a smartphone or tablet or USB interface on a computer. Printing begins
automatically if the e-mark create is in print mode and the device is moved over the printing surface by hand. If
rotation or height of the device above the surface exceeds a maximum range, printing is interrupted. When returned
to the normal range, printing restarts.
The e-mark create must be returned to the docking station after each use. The rechargeable battery (supplied) is
recharged using the power adapter (supplied). Only use original batteries and original replacement ink cartridges.
After extended periods between uses, the ink cartridge must undergo a cleaning cycle. The e-mark create should be
used at least once a month.
