COLOP e-mark create, Instructions For Use Manual, Page: 5 / 16

4
e-mark
®
create app
3
How to setup
4
Printing at a glance
5
The e-mark® create can be used with the e-mark® create app
on phones and tablets with either Android 7.0 and iOS 11 or higher.
Download here getemarkcreateapp.colop.com
the e-mark
®
create
Select New Imprint in the app menu (by clicking on the 3 horizontal line icon top left)
Choose Start without template, either 1,2 or 3 lines, or select a pre-made template from your
preferred category
Arrange or change your artwork in the editor
Once your design is ready to go, select the e-mark® create icon in the top right corner
The e-mark® create will beep and the app will indicate when your print has been received
Simply swipe the device either to the left or right to print your design
A short beep indicates that the imprint is done
Assemble your e-mark® create according to the Quick Setup Guide, which you received along
with your device
Pay attention that the Wi-Fi on your phone or tablet is switched on
Install the e-mark® create app and open it
Select your preferred language and click next
Accept the Wi-Fi information and click continue
Now enter the SSID and password that came with your e-mark® create (to be found on
the Quick Setup Guide) and click connect
On iOS devices you will be asked to join the Wi-Fi connection the e-mark® create generates - click join
5
1
2
3
4
5
6
7
Attention:
Never connect to the Wi-Fi through your phone settings, always connect through the app.
1
2
3
4
5
6
7