Colombo Construction 54NL Manual Download Page 5

REMOTE MANUAL PILOT IGNITION

54NL BASE MOUNTED FIREBOWL

WARNINGS

5

FOR  YOUR  SAFETY  READ  BEFORE 

OPERATING

 

!!!!

WARNING:  IF  YOU  DO  NOT  FOLLOW  THESE  INSTRUC-
TIONS  EXACTLY,  A  FIRE  OR  EXPLOSION  MAY  RESULT 
CAUSING  PROPERTY  DAMAGE,  PERSONAL  INJURY  OR 
LOSS OF LIFE.

•  IMPROPER  INSTALLATION,  ADJUSTMENT,  ALTERA-
TION,  SERVICE  OR  MAINTENANCE  CAN  CAUSE  INJURY 
OR PROPERTY DAMAGE. 

• INSTALLATION & GAS CONNECTION MUST BE DONE BY 
A  CERTIFIED  GAS  TECHNICIAN,  QUALIFIED  INSTALLER, 
SERVICE  AGENCY  OR  GAS  SUPPLIER.  FOR  ASSISTANCE 
OR ADDITIONAL INFORMATION CONSULT A QUALIFIED 
INSTALLER, SERVICE AGENCY, OR THE GAS SUPPLIER.

• THIS APLIANCE IS A DECORATIVE GAS APPLIANCE FOR 
OUTDOOR USE ONLY AND MUST NOT BE USED FOR COOK-
ING. 

COLOMBO  CONSTRUCTION  CORP  disclaims  any  responsibility 
for, and the warranty will be voided by, the following actions:

• Installation & use of any damaged components.

• Modification of the burner & valve assembly.

• Installation other than as instructed by this Owner’s Manual.

• Installation and/or use of any component part not approved 
by Colombo Construction Corp.

ANY SUCH ACTION MAY CAUSE A FIRE HAZARD.

The  installation  of  this  appliance  must  conform  with  local 
codes or, in the absence of local codes, with the National Fuel 
Gas Code, ANSI Z223.1.

Solid fuels are not to be burned in this gas appliance.

The appliance should be inspected before each use for debris, 
damage, or corrosion, and at least annually by a qualified ser-
vice person. 

• INSPECT THE APPLIANCE & COMPONENTS. 

• DO NOT INSTALL DAMAGED COMPONENTS.

• DO NOT INSTALL INCOMPLETE COMPONENTS.

• REPORT DAMAGED PARTS TO DEALER.

Do NOT use this appliance if any part has been under water.  

Immediately  call  a  qualified  service  technician  to  inspect  the 
appliance and to replace any part of the control system and any 
gas control which has been under water.

More frequent cleaning may be required as necessary. It is im-
perative that control compartment, burners and circulating air 
passageways of the appliance be kept clean to provide for ad-
equate combustion and ventilation air. 

This appliance is only for use with the type of gas indicated 
on the rating plate. This appliance is not convertible for use 
with other gases.

The appliance and its individual shutoff valve must be discon-
nected from the gas supply piping system during any pressure 
testing of that system at test pressures in excess of ½ psi.

The appliance must be isolated from the gas supply piping sys-
tem by closing its individual manual shutoff valve during any 
pressure testing of the gas supply piping system at test pres-
sures equal to or less than ½ psi.

Children and adults should be alerted to the hazards of high 
surface temperatures and should stay away to avoid burns or 
clothing  ignition.  Young  children  should  be  carefully  super-
vised when they are in the area of the appliance.

Clothing  or  other  flammable  materials  should  not  be  hung 
from the appliance, or placed on or near the appliance.

Any guard or other protective device removed for servicing the 
appliance must be replaced prior to operating the appliance.

Use  outside  only  in  well  ventilated  area.  Do  not  use  inside 
house, camper, tent, garage, vehicle or any type of un-vent-
ed or enclosed area. 

Do not operate or place appliance on, near, or in the  vicinity 
of any flammable materials, vapors, liquids or accelerants of 
any kind; including but not limited to: bottled gases, gaso-
line, kerosene, diesel fuel, oil, aerosol cans, paints, thinners, 
solvents, sealants, lubricants, chemicals, plastics, petroleum 
products,  electronics,  motors,  vehicles,  fertilizer,  gun  pow-
der,  ammunition,  firearms,  fireworks,  fabrics,  paper  prod-
ucts, wood, dry vegetation etc. 

Do not operate appliance during an electrical storm. 

Appliance  must  be  permanently  secured  on  a  stable  and 
level surface. 

Never operate while sleeping or unattended. 

Summary of Contents for 54NL






















Reviews: