Collomix GmbH
Rotation mixer
85080 Gaimersheim
AOX-S
Art.no. 37125
Rev. 3
Page 6
Intended use
Foreseeable misuse
The AOX-S model is a mixing device for mixing:
•
Mineral mortar, plasters and adhesives
•
Low-viscose, self-levelling floor coatings,
•
Cement-based levelling compounds and floating screed
•
Epoxy resin mortar
•
Small amounts of concrete or substances that are similar to concrete with low aggregate levels
•
Liquid plastics
as they are used in the construction industry.
Different mixing tools can be used for specific materials:
KR mixing tool:
various mortars, screed, concrete (-8 mm), chalk/gypsum plasters, lightweight masonry
mortar, epoxy resin mortar, adhesive mortar
DLX mixing tool:
Thin-bed mortars (for bricks), filler and levelling compounds, bonding agents, coatings
The recommended mixing capacity amounts to a maximum of 50 litres per mixture/max. 2 sacks (ma
-
terial-dependent). It is recommended to test the suitability and necessary material mixing time when
you start the work.
Observe the processing information of the material manufacturer regarding the used material.
Any other use of the machine or any use beyond this scope is considered unintended and thus improp
-
er. Safety and its protection can be impacted in this case. Collomix GmbH shall not be liable for any
resulting damage. Intended use also includes:
•
Compliance with all information in the operating instructions
•
Compliance with all safety information
•
Compliance with inspection and maintenance work.
The user shall be liable for damage resulting from non-intended use.
Reasonably foreseeable misuse that could result in danger for the user, third parties or the machine in
-
cludes:
•
Use of the machine and its accessories contrary to the intended use.
•
Operation of the machine using a mixing tool different from the specified one.
•
Use of damaged containers or containers not suitable for the mixer.
•
Mixing plastic or highly viscose materials.
•
Mixing of explosive substances.
•
Mixing of electrically conducting substances.
•
Mixing of chemically aggressive substances and corrosive liquids.
•
Mixing of food items.
•
Operation of the machine outside of the physical usage limits described in chapter “Intended use”.
•
Operation of the machine without the intended mixing bucket or with an unsuitable container
•
Operation of the machine in the maintenance position (drive unit folded up)
•
Bucket overfilling
•
Use of water jets or high-pressure cleaners for cleaning
•
Changes to the mixer as well as add-ons or retrofits without previous agreement with Collomix GmbH.
•
Operation of the machine contrary to the provisions of the operating instructions with respect to safe
-
ty information, installation, operation, maintenance, setup and malfunctions.
•
Bypassing or disabling of safety and protection devices of the machine.
•
Operation of the machine in the case/with obvious malfunctions
•
Repair, cleaning and maintenance work without disconnecting the mixer from the power supply
