5
EN
G
LIS
H
Use
CAUTION!
The food processor is equipped with a safety device, which prevents the
unit from starting if the mixer bowl and the lid are not attached properly.
Grating and slicing
1. Place the mixer bowl on the motor unit so
that it engages in the grooves, see fig. 1.
Turn the bowl
anti-clockwise until it locks in place with the
handle aligned with the control panel.
2. Place the accessory holder (2) on the drive
shaft.
3. Place the disc attachment (1) carefully on
the drive shaft with the required side facing
upwards.
4. Place the lid on the mixer bowl so that the
feed tube is to the left of the handle on the
mixer bowl.
5. Tighten the lid securely until you hear a
click, so the feed tube and the mixer bowl
are aligned, see fig. 2.
6. Connect the power cable to the electrical
outlet.
7. Fill the feed tube with foodstuff.
8. Use the Pulse button or ON button
depending on the food to be processed.
Feed in the food carefully with the pusher.
9. Release the Pulse button or press the OFF
button when you have finished grating/
slicing.
10. Allow all movable parts to stop and then
remove the lid by turning it clockwise.
11. Carefully lift away the disc attachment,
remove the accessory holder, and then
remove the bowl from the
food processor by turning it clockwise.
Fig. 2
Fig. 1
