6
EN
G
LI
SH
a) Hopper
b) Feeding device
c) Mincing-machine device
d) Lock switch
e) Motor
f) On/off button
g) Reverse switch
h) Indication lamp
i) Lock key
j) Hole plate, thin
k) Hole plate, medium-sized
l) Feeding roller
m) A 4 bladed knife
n) Hole plate, thick
o) Lock nut
Installation
1. Insert the feeding roller, with its plastic end inwards, into the mincing-machine device.
2. Then attach the 4-bladed knife with its edges facing outwards and place the chosen hole
plate on the top. The slot on the outside edge of the hole plate should be fitted to the
mincing-machine device.
3. Attach the lock nut properly.
I
K
J
N
