Coline 18-4655, Manual

Page: 8 / 32

ENGL
IS
H
8
• Never use the juicer for longer than 15 minutes at a time. The juicer must rest for at
least 30 minutes between operating cycles.
• The motor will stop if the interlock switch between the hopper and the motor unit is
disconnected during operation.
Care and maintenance
1. Unplug the mains lead and let the juicer cool before cleaning it.
2. Unlock the hopper (2) by twisting it anticlockwise and then remove it.
3. Detach the squeezing screw (3), strainer (5) and the spinning brush (6).
4. Rotate the juice bowl (7) to
and then remove it.
5. Empty the pulp container (15) and wash all the parts except the motor unit (11) in
running water. The detachable parts (except the motor unit) are also dishwasher safe.
6. The motor unit can be cleaned using a soft, damp cloth. Never immerse the motor
unit in water.
7. Make sure that all the parts are dry before reassembling the juicer.
Note: Pull back the sluice flap to facilitate the cleaning of the pulp spout (8).
Refit the sluice flap before using the juicer again.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Voltage 220–240 V, 50/60 Hz
Power 150 W