Fig. 5
Fig. 6
Fig. 7
Fig. 11
Fig. 8
A + B
To attach the bumper bars
Push the ends of the bumper bars in to the slots on the chassis until they
‘click’ in to place. To remove the bars, push in the buttons on both sides
and pull the bars off (5).
Leg rest adjustment
Push the buttons on both sides of the leg rest and select desired position
(6).
To attach the foot covers
Place the end of the leg rest in to the foot cover and wrap the top of the
foot cover around the bumper bar (7) and secure with the press studs.
To operate the hood
Pull the hood forward by the front rim of the hood. For added shade /
weather protection, the hood can be unzipped further as shown (8).
To operate the seat recline function
Squeeze the clasp on the back of the seat unit and pull downwards. When
the seat unit has reached the desired position, release the trigger. To raise
the seat unit, hold both straps with one hand and push the back of the
seat unit with your other hand (9).
To adjust and secure the harness
Push the buckle prongs in to the buckle housing until they snap into
position. Adjust sliders to ensure a snug fit for your child. After making
adjustments to the seat always re adjust the harness. Release the harness
by pressing the button on the buckle housing unit.
WARNING! Always use the crotch strap in combination with the waist belt.
WARNING! For babies aged 0 - 6 months the harness
must be fed through the retaining loops to prevent risk of
strangulation.
To fold the stroller
Make sure the seats are in the upright position, the hood is retracted and
the brakes are engaged. Slide the primary lock button (A) to the side and
then squeeze the secondary lock button (B). Keep the secondary lock
button held in and push up and forwards on the handle. Fold all the way
down until the folding catch locks in place.
Fig. 9
Seat
recline
clasp
Folding catch
Shoulder straps
Fig. 10
Sliders
Buckle
Buckle
Buckle
housing
A (
slide
)
B (
squeeze
)
6
