COLENTA 37 NDT, Instruction Manual

Page: 10 / 18

COLENTA 37 NDT Dryer
09/2008 FR Page
In the event of an accumulation of liquid due to
backup, overflow or other malfunctions of the
drain associated with the NDT Film Dryer call a
plumber or other contractor to correct the
problem with the drain.
Colenta assume any responsibility or liability
whatsoever for the service ability of any drain
connected to the NDT Film Dryer.
Such drains are the sole responsibility of the
customer.
Drains must be made of chemically resistant
and non-corrosive material.
Chemical Hazards
Chemicals can be the source for errors,
contaminate the waste water, irritate skin or
eyes.
Spills must be cleaned up immediately as
follows:
1. Prevent the spilled chemicals from
entering a waste water drain.
2. Clean up the spill with a moist mop
or rag.
CAUTION!
When handling chemicals, especially fixer,
wear protective clothing, safety goggles and
rubber gloves.
If plateprocessor chemicals make contact with
the eyes, rinse them thoroughly with lots of
water. If irritation persists, consult a physician.
3. Dispose cleaning materials and collected
waste water from the clean up according
to environmental regulations and locals
codes.
4. Avoid any inhalation of chemicals as this
is dangerous to health.
5. Observe all environmental regulations for
storage and disposal of waste chemicals.
6. Use this manual together with the
instructions for chemicals.
When handling chemicals wear protective
clothing, safety goggles and rubber
gloves.
Corrosive Vapours
CHEMICAL VAPOURS MAY IRRITATE EYES,
LUNGS AND SKIN, IF ALLOWED TO
ACCUMULATE IN WORK AREA.
Assure an adequate supply of fresh outdoor air
through natural or mechanical ventilation.
· Make sure that qualified service personnel is
checking the external exhaust system at
regular intervals.
· Read the
Material Safety Data Sheets (MSDSs)
for more information regarding the proper
safety procedures for working with photo
processing chemicals.
8