Coleman POWERSPORTS RTK200 Owner'S Manual Download

Page: 34 / 46

WARNING

Checking chain tension while

the engine is running can cause

serious injury.
Always make sure engine is

off before checking drive chain

tension.

MAINTENANCE

Chain and Sprocket

inspection

Inspect drive chain for wear,rust,

bound links, proper lubricationand

propertension.
If drive chain has a problem, correct

or replace. Contact a service center

for chain replacement.
A worn drive chain could also mean

the sprockets may be worn. Look

for the following on sprockets (1):

Worn teeth,broken or damaged

teeth, loose sprocket mounting

nuts.
If sprockets show signs ofwear,

contact a service center for

replacement.

Chain Tension

Chain Lubrication

Lubricating the chain before each

ride will help to ensure maximum

life of the chain andsprockets.

Instructions for

cleaning and chain

lubrication:

1. Clean chain with a chain cleaner

or a cleaning lubricant such as

WD40.

2. Lubricate chain with chain lube.

Check tension of drive chain (2),

chain tension slack should be

0.2 - 0.6in (5 - 13mm)

Chain tension (slack)

Adjustment

1. Loosen nuts (3) on Chain

tensioner.

2. Adjust chain tension by

turning tensioner nuts(4).

Clockwise will tighten the chain.

Counter clockwise will loosen the

chain.

3. Once the chain is at the

correct tension re-tighten nut (3).
4. Re-check chain tension.

5-15mm

(0.2-0.5in)

Summary of Contents for POWERSPORTS RTK200















































Search results

Summary of Contents for POWERSPORTS RTK200

Reviews:

Related manuals for POWERSPORTS RTK200

Brands by name

Popular brands

Coleman POWERSPORTS RTK200, Owner'S Manual

Search results

Summary of Contents for POWERSPORTS RTK200

Reviews:

Related manuals for POWERSPORTS RTK200

Brands by name

Popular brands