Periodic Maintenance and Adjustment
8-54
Table 3:
Solution of Common Problems in Electrical System
S/N
Problems
Solutions
1
Lamps don't work.
1. Check if the headlight switch functions well.
2. Check if the wires are broken.
3. Check if the lamps or bulbs are broken.
2
Vehicle cannot go into 4
drive mode.
1. Check if the control switch on meter board works well.
2. Check if the differential lock control magneto plug in rear
bridge reduction gear box are broken.
3. Check if the wire is broken.
3
Rear differential will not
work.
1. Check if the control switch on meter board works well.
2. Check if the differential lock control magneto plug in rear
bridge reduction gear box are broken.
3. Check if the wire is broken.
4
Meter display is not
normal.
1. Check if the sensor is broken.
2. Check if the meter is broken.
3. Check if the surface of speed sensor is contamniated with
iron dust.
5
Start switch on meter
board will not work
1. Check if the switch is broken.
2. Check if the wire is broken.
3. Check if the ECU in electrical injection system is broken.
Summary of Contents for OUTFITTER 700-L
