Coleman HS400UTV-5, Owner'S Manual

Page: 38 / 185

4-13 Control Functions
To change from 2WD to 4WD
Stop the vehicle, be sure the select lever is
set to position
，
and then set the switch to
“4WD”.
When the vehicle is in 4WD, the 4WD
indicator will come on in the multi-function
display.
To change from 4WD to 2WD
Stop the vehicle, and then set the switch to
“2WD”
。
The 4WD indicator will go out in the
multi-function display.
On -Command Differential Gear Lock
S witch “ 2WD /LOCK ”
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-
drive switch is set to “4WD”,
move the select lever to position , and then
set the switch to “LOCK”.
1. On-Command
differential lock switch “
4WD/LOCK
”
2. Select lever
When the differential gear is locked, the