(Pg. 6)
Ö
Ö
NOTE:
The grill is upside-down during this assembly step.
Ö
Ö
Assemble the 9-VOLT BATTERY to the ELECTRODE MODULE.
Ö
Ö
Attach two wires (
27” long
) from the ELECTRODE MODULE labeled
LB1
and
LB2
to the LEFT BURNER (thread thru wire clip).
Ö
Ö
Attach two wires (
27” long
) from the ELECTRODE MODULE labeled
RB1
and
RB2
to the RIGHT BURNER.
Ö
Ö
Verify that two wires are attached from the MAIN BURNER to the ELECTRODE MODULE labeled
MB1
and
MB2
(factory installed).
Ö
Ö
Verify that two wires are attached from the IGNITER BUTTON to the ELECTRODE MODULE on the left side (factory installed).
Step
4
4-A
4-B
Left Burner
Right Burner
4-C
Right Burner
Electrode Wires
Left Burner
Electrode Wires
Main Burner
Electrode Wires
Igniter Button
Wires
NOTE: Wires are
factory installed to the
Electrode Module.
9-Volt Battery
ELECTRODE MODULE
Left Side
Caution: Insure that the
wires DO NOT touch hot
surfaces such as the grill
casting!
ELECTRODE
MODULE
ELECTRODE
MODULE
MB1
LB1
RB1
MB2
LB2
RB2
Thread Wires
through Wire
Clip
Thread Wires
through Wire
Clip
