background image

3

Clip Tent to Frame

–Starting at the top rear of the tent, 

attach the tent to the frame using 
the frame clips. (illus. 7 & 8)

–Unzip front door, and standing in 

the open door, attach the remainder
of the tent ridge frame clips to the 
ridge pole. (illus. 7 & 8)

–Attach all the side frame clips to 

the frame. (illus. 7 & 8)

4

Attach Rainfly 

–Drape rainfly over the tent frame.
–Insert frame poles in the front 

and rear into reinforced pockets 
located at the center edges of the 
underside of rainfly. (illus. 9 & 10)

–Attach rainfly to the frame poles

with attachments.

– Attach “S” hooks to the ring of the

pin & ring system.

–Attach corner guylines to the

guy triangles at the rainfly 
corners. Stake out guylines 
away from the tent at an 
angle. (illus. 10)

– Attach side guylines to the ring 

on the sides of the rainfly 
and stake out. (illus. 11)

–Tent wall can attach to guyline 

and/or rainfly to expand interior 
space. (illus.10)

illus. 8 

Assembled tent without rainfly. Note the

frame clips located 

on tent.

illus. 7 

Frame clip

attached to

tent frame.

Note: Fly pole can be turned under and secured w
velcro to ridge pole when rainfly is not in use.

illus. 10

Completed tent with rainfly.
Note the guylines on each 
corner (4) and side guylines (2

Attachments located on
under side of rainfly

Clips to 
tent wall

illus. 9 

Insert rainfly

pole piece into 
pockets on undersid
of rainfly

PRINTED IN CHINA  

Rev. 7/03

Things You Should Know

• 

Under certain conditions (cold weather, high  humidity, etc.) 

condensation will form on the inside surfaces of your tent. Condensation is
caused by water vapor from your breath, perspiration, or any wet clothing
inside your tent. It is NOT LEAKAGE through the tent fabric. It can be 
minimized by removing wet clothing from your tent and by providing good
ventilation through the tent.

• 

Never store tent, even for a short period of time, without drying it thorough-

ly and brushing off caked dirt. Do not pack stakes or poles inside your tent.
Use a separate storage bag.

• 

STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF.

NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO
REMOVE STAKE.

• 

TENT POLES SHOULD NOT BE LEFT TELESCOPED

TOGETHER DURING STORAGE.

• 

Seam sealer has not been provided with your tent. We recommend seam

sealing your tent prior to camping. Seam sealer may be purchased through
your local retailer or at your local sporting goods store.

• 

Do not leave your tent set-up for weeks at a time, be aware that expo-

sure to the ultraviolet rays of the sun can seriously damage material and/or
cause it to become discolored.

• 

See owners manual for more tips.

WARNING:

KEEP ALL FLAME AND HEAT SOURCES 

AWAY FROM THIS TENT  FABRIC. This tent meets the flammability
requirements of CPAI-84.The fabric will burn if left in continuous contact with
any flame source.The application of any foreign substance to the tent fabric may
render the flame-resistant properties ineffective.

THE COLEMAN CO., INC.

3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278  •  www.coleman.com

MADE IN CHINA

illus. 11  

Stake out tent

with adjustable guylines.
Slide the disc up the rope
to tighten guyline.

Reviews: