15
Cleaning Exterior Parts, and Surfaces
ALL MATERIALS including stainless steel, porcelain, and painted steel parts can become stained,
soiled and corroded by dirt, pollution, deposits from inappropriate cleaners and grease. Routine
cleaning of exterior surfaces is necessary to remove contaminants, rust and avoid permanent
damage.
Do’s :
•
DO
remove dirt and contamination immediately to avoid permanent damage to porcelain, or
painted surfaces.
•
DO
wipe down all surfaces frequently with a basic vinegar and water solution, or basic warm
water and detergent.
•
DO RINSE OFF
all cleaners, with clean warm water, and dry completely with a soft
or microfiber cloth.
•
DO NOT
use any chloride-containing detergents, abrasive cleaners, bleach or other chemical
cleaners as the may permanently damage painted surfaces.
5. Use a wire or paper clip to clean any blocked burner ports.
6. Brush away any rust or corrosion from the burners surface, and wipe clean with a damp cloth.
Dry the burners.
7. Re-install the burners. Ensure that the burners are properly seated on the valve gas jet before
assembling hardware.
NOTE
Before reinstalling burners, use a cotton swab to clean the valve gas jet.
CARE AND MAINTENANCE
