11
12
ASSEMBLY AND OPERATING INSTRUCTIONS
ASSEMBLY AND OPERATING INSTRUCTIONS
Fill the container with clean water. Make sure the inlet adapter (G2) stays on the
inlet of the machine. Carefully snap the container onto the pressure washer and
clip hinges from both sides to secure it.
Depress trigger until there is steady
stream of water.
Make sure the ON/OFF switch is on the
OFF position.
Press the ON button.
Completely unwind power cord and
plug the unit into an outlet.
OFF
ON
8
6
9
7
Or alternatively you can fill the container with clean water and operate
the pressure washer by drawing the water from the container.
Attached quick-connect coupling to garden hose (hand tighten only) and
connect to inlet adapter. Attach garden hose to water supply and turn water on.
If tap water is available in the premises, you can connect the pressure
washer directly with a garden hose.
5
5
WARNING
Never use bleach, chlorine products and other corrosive chemicals.
Never use liquids containing solvents (i.e. paint thinner, gasoline, oils).
Never use ammonia products. Never use acid-based products.
WARNING
Never use water containing visible impurities (i.e. pebbles, sand, bits of metal or plastic.