English
49
Error Code
Fault Condition
1
Probe Range Error
2
Box Lost Error
3
Hotplate Temperature Error
4
Hotplate Ambient Error
6
Communication Delay
8
Probe Out Error
9
Comms Error Display Not Responding
10
Display Has fatal Error Flags Set
11
Probe Failed Open Circuit
12
Probe Failed Short Circuit
13
Probe Over 200
O
C Error
17
Comms Delay, HCF Not Responding
18
Comms Error, HCF Not Responding
19
PCB Mismatch HCF & Display Configured Differently
Product Repair
Please contact Cole-Parmer or your local distributor for repair or maintenance
issues
Product Maintenance
Disconnect power to the product by unplugging the power cord before
performing any maintenance or inspection
General
Inspect the power cord regularly and replace if damaged. Use only
replacement power cords available from Cole-Parmer. The unit is fitted with
a hot condition IEC socket for fitting to the mains supply (always use correct
power cord)
Fuse Replacement
The dual mains fuses are located inside the unit and are not user replaceable
parts
General Cleaning
• Ensure the top plate is cool and the unit is disconnected from the mains
electricity supply
• It is important to keep the product clean and dry
• Remove any exterior liquid spills promptly
• Clean exterior surfaces with a damp cloth and a mild detergent solution
• Do not re-connect to power until all cleaned surfaces are dry
• If liquid gets inside the product, immediately disconnect power to
General
Summary of Contents for Stuart CP152B
Page 56: ...English HS100 061 Version 1 4...
