GENERAL INSTRUCTIONS
Two different coupling drive adapters are supplied with each drive, the
coupling with the narrow slot is for MASTERFLEX
®
L/S
®
pumps, the
coupling end with a wide slot is for MASTERFLEX
®
I/P
®
pumps (see
Figure 1).
3
FIGURE 1 — DRIVE ADAPTERS
To install the drive adapter on the drive, first install the rubber coupling
sleeve from the loose parts bag on the coupling end mounted on the
mechanical speed control by slipping it over the end of the coupling
through the pump mounting plate opening. Then select the appropriate
adapter for the pump you wish to drive and slip it into the rubber sleeve
and seat it firmly (see Figure 2). The pump mounting plate which is
mounted to the base has been centered at the factory for optimum
performance with both MASTERFLEX
®
L/S
®
and MASTERFLEX
®
I/P
®
pumps,
DO NOT CHANGE ITS LOCATION.
The pump mounting plate
is threaded to accept all standard and optional mounting hardware for
MASTERFLEX
®
L/S
®
and MASTERFLEX
®
I/P
®
pumps. Orient the tang
of the pump you wish to drive with the drive adapter and install the
pump tang in the adapter. Fasten the pump to the mounting plate using
the pump mounting hardware.
Untitled-1
2/17/04, 7:27 AM
7
