32
ACCESSORIES
The following accessories are available for use with the FSB-200-P-AC.
Sample basket
The steel mesh sample basket safely holds samples away from the heating elements of the fluidized bath and
assists retrieval of items from the bath. The basket contains a collar to reduce alumina spilling from the chamber.
Product Code
Description
F7759
Steel mesh sample basket with collar and sensor plate
Dust suppression system and probe holder
The Dust Suppression System chimney (FFB08DS1) is combined with a Probe Holder (FFB08PR1 or FFB08PR2) to
enable the FSB-200-P-AC user to seal the fluidized bath, making it suitable for calibration labs where airborne
dust must be avoided. In addition, Probe Holders allow free flow of alumina around the exterior of the holder
preventing dead areas. At the base of each Probe Holder is a large steel equalization block surrounding the
sensors, assuring constant uniformity, reduced temperature fluctuation and improved calibration accuracy.
Stability and uniformity are >0.010°C in dead-bed mode with a Dust Suppression System.
Note: Dust Suppression System and Probe Holder must be purchased together for correct fitting.
Product Code
Description
FFB08DS1
Dust Suppression System with chimney
FFB08PR1 Probe Holder for 8 probes: 8mm x 281mm deep
FFB08PR2 Probe Holder for 8 probes: 3mm, 4mm(x3), 5mm, 6mm(x2), 8mm x 300mm deep
FFB08FL1
Spare filter for Dust Suppression System
Air Compressor
Antylia Scientific can supply a free-standing moisture and oil free air compressor complete with the necessary
filtration system for installations where a compressed air supply is not available.
Product Code
Description
F120D
Air Compressor 230V, 50Hz, 1500W
Air pressure regulator and filter
Antylia Scientific can supply a filter/regulator assembly for compressed air which is not moisture or oil-free.
Product Code
Description
F5915
Air Pressure Regulator and Filter
