_____________________________________________________________________________
Cole-Parmer CLW-108i & CLW-128i Washers
28
CLEANING
REQUIRED
CLEANING
AGENT *
METHOD OF
APPLICATION **
EFFECT ON FINISH
Penny-Brite or
Copper-Brite
Use in direction of
polish lines on No.4
(polished) finish.
Wipe with dry cloth.
May scratch No.2
(mill) and Nos.7 and
8 (polished) finishes.
Paste Nu-Steel,
DuBois Temp,
Tarnite, or Kelox
Rub with dry cloth or
stainless steel wool.
Use in direction of
polish lines on No.4
(polished) finish.
May scratch No.2
(mill) and Nos.7 and
8 (polished) finishes.
Revere Stainless
Steel Cleaner,
Take-Off, or AC-60
Apply with damp
sponge or cloth.
Use in direction of
polish lines on No.4
(polished) finish.
May scratch No.2
(mill) and Nos.7 and
8 (polished) finishes.
Heat Tint or
Heavy
Discoloration
Allen Polish, Steel
Bright, Wyandotte,
Bob-O, Zud, Dubrite,
or Prepare Dex
Rub with a damp
cloth.
Use in direction of
polish lines on No.4
(polished) finish.
May scratch No.2
(mill) and Nos.7 and
8 (polished) finishes.
Tenacious
deposits, rusty
discolorations,
industrial atmos-
pheric stains
Oakite No.33, Dilac,
Texo 12, Texo N.Y.,
Flash-Klenz, Caddy
Cleaner, Turco
Scale 4368, or
Permag 57
Swab and soak with
clean cloth. Allow to
stand 15 minutes or
more, per directions
on package. Then
rinse and dry.
Satisfactory for use
on all finishes.
Vinegar
Swab or wipe with
cloth. Rinse with
water and dry.
Satisfactory for use
on all finishes.
Hard Water
Spots and Scale
Dilac, Oakite No.33,
Texo 12, Texo N.Y
Swab with cloth or
soak. Let stand
10-15 minutes.
Always follow with
neutralizer rinse,
and dry.
Satisfactory for use
on all finishes. Effec-
tive on tenacious
deposits or where
scale has built up.
* Use of proprietary names is intended only to indicate a type of cleaner, and
does not constitute any endorsement (nor does omission of any proprietary name
imply its inadequacy).
All products should be used in strict accordance with
instructions on the product package.
** In all applications, a stainless steel wool, sponge, fibrous brush, or pad is
recommended. Avoid use of ordinary steel wool or steel brushes for scouring
stainless steel.
Table 7-1. Cleaners for Stainless Steel.