_____________________________________________________________________________
Cole-Parmer CLW-108i & CLW-128i Washers
25
To
abort
cycle operation, hold the
START / STOP BUTTON
depressed for 3 seconds.
Using the Cycle Lock Function
In addition to the door Safety Catch mechanism, the program
Cycle Lock function can be used to help prevent accidental or
unauthorized washer operation. When Program Lock is enabled,
the key-shaped control-panel indicator illuminates and the
PROGRAM SELECTOR
BUTTON
is inactivated—preventing
program selection and operation until Cycle Lock is disabled.
To activate the Cycle Lock function:
1.
Turn OFF washer power using the power button.
2.
Simultaneously depress and hold the
HW
and
HR
buttons
as you press the power button to restore power to the unit.
3.
Release the buttons.
4.
Press the
PROGRAM SELECTOR BUTTON
until the
display shows “1” with the key symbol indicator illuminated.
5.
Press the
START BUTTON
to confirm the selection and
return to the normal operating state.
To
temporarily
de-activate the Cycle Lock function for 3 minutes
so that you can select and start one cycle, simultaneously depress
and hold the
HW
and
HR
buttons.
To
permanently
de-activate the Cycle Lock function (until you
next activate it), follow steps 1 through 5 above, but change the
“1” value to “0” with the
PROGRAM SELECTOR BUTTON
,
extinguishing the key symbol indicator.
