background image

 

WARRANTY 

 
The Manufacturer warrants this product to 
be free from significant deviations from 
published specifications for a period of 

three

 years. If repair or adjustment is 

necessary within the warranty period, the 
problem will be corrected at no charge if it 
is not due to misuse or abuse on your part 
as determined by the Manufacturer. Repair 
costs outside the warranty period, or those 
resulting from product misuse or abuse, 
may be invoiced to you. 
 

PRODUCT RETURN 

 
To limit charges and delays, contact the 
seller or Manufacturer for authorization and 
shipping instructions before returning the 
product, either within or outside of the 
warranty period. When returning the 
product, please state the reason for the 
return. For your protection, pack the 
product carefully and insure it against 
possible damage or loss. Any damages 
resulting from improper packaging are your 
responsibility. 
 

TECHNICAL ASSISTANCE 

 
If you have any questions about the use of 
this product, contact the Manufacturer or 
authorized seller. 
 

Trademarks bearing the ® symbol in this publication are 

registered in the U.S. and in other countries

A-1299-0628 

Printed In Singapore 

68X309906 Rev 1  04/04 

Summary of Contents for 91100-00





























Reviews: