12 \ USER OPERATION MANUAL:
FHD-400 Series
Cole-Parmer
®
coleparmer.com
Final Assembly
10. To install the airflow sensor, remove
the clear panel on the inner right sidewall. Open
the screw cap on the outside of the enclosure,
undo the screw and nut and set
aside. DO NOT
DISCARD!
11. Remove any tape on the airflow sensor which
is
used to protect the sensor wires. Install the sensor
by attaching to the enclosure with the screw and
nut
.
12 . If not already installed, slide polypropylene spill
tray into the enclosure. The side with the extended
handle/lip should go toward the back of the hood
.
Warning - Once installed do not remove spill tray
from enclosure. Do not use tray like a drawer. Do not
push down, lean on or apply excessive force. Tray is
only intended to sit over existing work surface.
13 . Attach power cord to the inlet on the right
side of the head unit and connect
to
appropriate power source .
