Page
6
2. Installation
Please read this operating manual carefully before you use this unit.
If the unit is installed on an abnormal installing condition, it might cause damage or
abnormal operating.
1) Please check on the proper voltage for operating. You should check the
electricity in accordance with the ID label plate. (The backside of unit)
Please check on the proper voltage, phase of capacity for an installing place.
Main power must be grounded.
If it would not be, may cause a serious injury or damage on the unit.
2) This instrument is requested not to be used where is inclination and vibration
place.
3) Avoid places with direct sunlight.
4) Prevent overflowing of water in the bath, and do not operate with wet hands.
5) Plug out the power cord when you do not use the instrument.
