Safety
instructions
• Only use medium that will not react dangerously with the energy generated through processing or through other ways e.g. light irradiation.
• Safe operation is only guaranteed with the accessories described in the ‘Optional accessories’ section.
• Please use the accessories listed on the manual in accordance with the operating instructions.
• Ensure that the external temperature sensor is immersed in the medium when connected to thermometer(Pt1000s).
• Accessories must be securely installed and firmly attached to the instrument and the centre of gravity of the assembly must lie within the
surface on which it is set up.
• Always disconnect power before installing accessories.
• The instrument can only be disconnected from the power supply by pulling out the power plug.
• Caution: Do not spill corrosive liquids on the instrument! Do not use the instrument under water!
• Caution: High voltage
！
The appliance should be opened only by professionally trained maintenance and repair personnel.
• The mains voltage must be in accordance with the voltage marked on the nameplate
• Unplug the instrument from the electric outlet if it will be unused for a long period of time.
• Do not cover the device with cloth or plastic film, or the instrument will be overheat.
• Keep the instrument and accessories from pressing and colliding.
• The minimum distance between the instrument and above should be 800mm.
• Ensure the distance between the instruments and the distances between the
instrument and the surrounding walls is at lease 100mm.
!
!
2
>
100mm
>
100mm
>
1
0
0
m
m
