TIMER BUTTON
6
Used to initiate the AUTO ON start
time and AUTO OFF stop time
program, in conjuction with the
(+)
&
(-)
buttons. The timer on/off
indicator light illuminates under the
timer on/off settings.
SWING BUTTON
7
(Applicable to the models with
auto swing feature only)
Used to initiate the Auto swing
feature. When the operation is ON,
press the SWING button can stop
the louver at the desired angle.
LED DISPLAY
8
Shows the set temperature in " " or
"
" and the Auto-timer settings.
While on DRY and FAN modes, it
shows the room temperature.
FOLLOW ME/TEMP SENSING
(OPTIONAL)
9
NOTE:This feature can be activated
from the remote control ONLY.
The remote control servesas a
remote thermostat allowing for the
precise temperature control at its
location. To activate the Follow
Me/Temp Sensing feature, point the
remote control towards the unit and
press the Follow Me/Temp Sensing
button. The remote display is actual
temperature at its location. The
remote control will send this signal
to the air conditioner every 3
minutes interval until press the
Follow Me/Temp Sensing button
again.If the unit does not receive the
Follow Me/Temp Sensing signal
during any 7 minutes interval, the
unit will beep to indicate the Follow
Me/Temp Sensing mode has ended
2.2 OPERATION INSTRUCTIONS
COOL OPERATION
FAN OPERATION
Press the "MODE" button until the
"COOL" indicator light comes on.
Press the ADJUST buttons "+" or " -
" to select your desired room
temperature. The temperature can be
set within a range of 62 -88 17 -30 .
Press the "FAN SPEED"
button to choose the fan speed.
Press the "MODE" button until the
"FAN " indicator light comes on.
Press the "FAN SPEED"
button to choose the fan speed.
The temperaturecannot be adjusted
Do not put the duct to window.
