Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
SAFETY DEVICES
This appliance has three protection devices:
•
Tilt switch - this will automatically turn the appliance off if the appliance is not in
the correct operating position.
•
Resettable thermal link - this will automatically disconnect the power to the
appliance at a pre-set overheat temperature. To Reset Unit -
•
Unplug the unit and wait 10 minutes for the unit to cool down.
•
After the unit has cooled down, plug the unit into the electrical outlet and
follow the operation instructions described in this manual.
If this occurs again, investigate what is causing the appliance to overheat.
•
Thermal fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).
CAUTION:
The appliance generates heat during use. Precautions must be
taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
The appliance requires regular cleaning to ensure trouble free operation:
•
Unplug the appliance from the mains supply before cleaning.
•
Ensure that the appliance has been allowed to cool down completely before
cleaning.
•
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure these deposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
dirt.
•
Never use solutions such as petrol, thinners or polishing agents.
•
Ensure the appliance is dry before plugging back into the mains supply.
•
Do not attempt to dismantle the appliance.
•
There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician.
Operating your Appliance
