Cold Jet i3 MICROCLEAN, Operator'S Manual

Page: 20 / 32

20
MAINTENANCE
DAILY MAINTENANCE
1. Drain water out of the lines before using the
machine.
(Turn the bleed valve ON (I) to drain the water).
2. While in operation check the pressure gauge for
damage.
3. Check the air and blast hoses for damage
(ie: cuts or scuff marks).
1. Check the rotary knives for wear and damage.
2. Make sure the nozzle airflow exit end is not
deformed or burred.
WEEKLY MAINTENANCE
MONTHLY MAINTENANCE
1. Check the air filter element.
BIANNUAL MAINTENANCE
1. Check pneumatic air lines
2. Check condition of power cord
3. Check all lights
4. Check static bonding cable
5. Check the accessories
6. Check all valves
7. Safety test the unit
8. Check chain tension
If you are not an
authorized Cold Jet
Service Technician,
please call to
schedule service.
+1-800-777-9101 or
(+1-513-576-8981)
2. This machine has been manufactured with a
roller chain drive. CAUTION: MAKE SURE ALL
GUARDS AND PANELS ARE INSTALLED BEFORE
OPERATING.
The chain requires minimal maintenance. However,
it should be lubricated monthly for maximum drive
life.
For easy application of the lubricant (eg. Dupont™
Teflon™ Chain Saver Lubrication, McMaster Carr
part no. 8710T35 for 14oz.), spray through the
slotted vents on the left side panel.