COLASIT AG
Plastics construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
TD-000 798-E
Edition 10/2019, Subject to alteration
Copyright by COLASIT AG Spiez
Page 5
COLASIT only guarantees the durability of materials on condition that technological data was available
before production.
Any change in the conditions of use is only permissible after approval by COLASIT; otherwise this will entail
loss of warranty.
Any changes or repair work during the warranty period may only be made by our fitters or with our written
consent.
We refer to the limitation o
f warranty noted in the “Motor“-section in the case where a frequency converter
supplied by a third party is fitted.
The fan must be deployed and used in accordance with the conditions mentioned
in this operating manual. Only in this way can its function be guaranteed and
dangers to persons and material be excluded during operation. We accept no
liability nor guarantee any claims for damages arising from nonobservance of this
manual or from inappropriate operation
1.4
Safety review
After installing the fan, we recommend the operator conducts a review of the entire operational environment.
In this way it can be guaranteed that neither the fan will suffer damage nor that the fan will cause any
damage.
1.5
Personnel qualifications
The fan may only be put into operation, handled, operated, maintained and cleaned by trained personnel
who are authorised (and competent) to carry out such work.
The personnel must possess the appropriate skills needed to operate the fan and be familiar with the effects
of the reactions caused by the fan.
The personnel qualified to operate the fan must be able to react adequately and correctly in case of a fault or
an emergency.
1.6
Possible emergencies
An emergency may result from the bursting or melting of plastic components as a result of mechanical
damage or chemical and thermal influences. In this case, parts may fly off or vapour may be produced that
may be hot, corrosive, poisonous, irritating or inflammable (e.g. hydrochloric acid vapour occurring from
burning PVC).
There may be a danger of fire under certain circumstances.
For the choice of the correct fire-extinguishing devices and the positioning of the firefighting equipment,
please follow the recommendations of your local fire station.
1.7
Safety officer (SO)
The function of the safety officer or his representative is defined in the operating company’s organisational
chart. The name of the person must be known to all personnel who are responsible for the fan.
The operating company defines his competencies and his area of responsibility.
The safety officer approves the fan for operation.