Marlene 3
11
Position “0” : Oven off
Position : oven light On
Position : fan and oven light On
Position : rear heating element, fan and oven light On
In this stage it is possible to adjust the oven temperature with the 0 to
250°C graduated kno b
Position : top heating element (Grill) and oven light On. In this stage it is possible to
adjust the oven temperature with the 0 to 250°C graduated knob
Temperature knob
The temperature adjustment knob has a graduated scale from 0 to 250 °C. This knob is used only when th e heating
elements are switched on with the multifunction knob.
•
The wood-fired oven and multifunction oven must only be used for their intended purpose, i.e. for cooking
food; any other use is improper and therefore potentially hazardous.
Wiring diagram
3.10 Idle period and summer
In summer, it is advisable to clean the combustion chamber, ash pan, fume ducts in the oven, the chimney and flue;
also, remove all residuals on the inside and outside of the stove, check all seals and replace them if necessary.
The appearance of the hotplate and other cast iron parts can be preserved by applying neutral vaseline.
At the end of maintenance operations, close the doors and air controls to prevent dust, etc., from entering.
If the stove is not going to be used for a long period, after the above operations and disconnecting from the flue it is
advisable cover it with a protective cloth and store in a safe and protected place.
KEY:
C- Switch
K1-Oven fan earth wire
K2-Rear heating element earth
wire
K3-Roof heating element earth
wire
K4-Oven light earth wire
K5-Oven thermostat earth wire
F-Line
N-Neutral
M-Earth
S1-System indicator
S2-Oven heating element indicator
P-Control panel
TF- Oven thermostat
LF- Oven light
V- Oven fan
R1-Rear heating element