manualshive.com logo in svg

COINWASH TD30X30, Service Manual

Share
Download
COINWASH TD30X30 Service Manual Download Page 26

11. Periodic maintenance

11

Service

manual

487 0329 81

10

The area surrounding the dryer

Fresh-air intake to the room

Check that the fresh-air intake to the room and the exhaust ducts/pipes from the room 
are not clogged by lint/dust or blocked in any other way. 

Dryer area

Check that the dryer area is clear and free from combustible materials, gasoline and 
other flammable vapours and liquids.

Safety and warnings signs (US and Australia only)

Product safety signs or labels should be replaced when they no longer meet the legibility 
requirements for safe viewing.

Check that all the safety and warning signs are located on the dryer as shown in the 
installation manual supplied with the dryer. A copy of this manual is available from your 
dealer.

Replacement of safety signs or labels should be in accordance with the installation 
manual.

Summary of Contents for TD30X30











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands