COINWASH TD30X30, Service Manual

Page: 24 / 106

11. Periodic maintenance
11
Service
manual
487 0329 81
8
Exhaust plenum
Check every semi-annually that the exhaust plenum on the rear of the dryer has not
become blocked with lint or other debris.
Dismounting
1. Dismount both rear panels.
2. Dismount the 4 screw in the top panel to the left-hand side.
3. The exhaust plenum can now be lifting away.
The inside part of the exhaust plenum can be cleaned.
4. Reassemble the dryer.
Back draft dampers
Check every semi-annually the Back draft dampers.
Fig. 1 The back draft dampers is located in the exhaust plenum. To dismount the exhaust
plenum see Exhaust plenum.
Blower compartment
Check every semi-annually that the blower compartment has not become blocked with
lint or other debris.
Dismounting the blower to get to the blower compartment, see section 30.
Blower wheel
Check every semi-annually that the blower wheel has not become blocked with lint or
other debris.
Fig. 2 Dismount the blower motor to get access to the blower wheel to clean,
see section 30.
NOTE Be careful not to damage the blower wheel.
1 2