![background image](http://html.mh-extra.com/html/cointra/connect/connect_installation-and-use-manual_2635018086.webp)
86
EN
cod. 3541T680 - Rev. 04 - 09/2019
Battery
: The icon on the screen is activated when the battery level is too low.
flame
»
Thermostat connected to an on-off boiler, the icon indicates request status.
»
Thermostat connected to an OpenTherm boiler, the icon indicates burner status.
Note
:
At first activation the thermostat is configured automatically in
On-Off
wire
connection mode.
When the thermostat and the WiFi receiver are connected to the wireless network,
the thermostat automatically switches to
RF On-Off
.mode.
When the WiFi receiver is connected to an OpenTherm boiler, the thermostat auto
-
matically switches to
RF OpenTherm
mode.
If the thermostat has been configured as RF (on-off or OpenTherm) it does not
automatically switch to
on-off wire
mode. This can only be done by removing and
putting back the batteries.
dhW
: in manual or automatic mode, the icon indicates that the appliance is active.
Note
: The icon is only present in the case of RF connection with OpenTherm boilers.
heating
: the icon indicates that heating is active.
Note
: The icon is only present in the case of RF connection with OpenTherm boilers.
Temperature
: the room temperature or errors are displayed:
E82
: RF communication error
E83
: OpenTherm communication error
Summary of Contents for CONNECT
