4
ECONOMY:
ANTIFREEZE:
PROGRAMMING:
The thermometer that appears in the display indicating that the radiator is warming, when the
required temperature is achieved then the thermometer disappears from the display.When
temperature in the area of radiator is reached the radiator automatically switches of and
temperature symbol will not be seen. When temperature drops by 0.5 degrees celcius
radiator will come back on and temp symbol is visible again.
5.4 Edit day, hour and programming:to re program hold down mode key and you must go
through the setting of the day and time again.
To edit the day, hour and programming press and hold the mode key until you see the clock icon
in the display.
First select the day of the week you are in (1 - Monday, 2-Tuesday,...) which
is showing in the box using the keys + and –.
You press the OK key to confirm the day.
It will then flash to show time selection.
The digits will flash the hours and the AM or PM symbol at the left side. With the keys + and –
selects the time and confirm with the OK key.
The minute digits will flash, with the keys + and – select the time and
confirm with the OK key.
Then edit the daily and weekly programme, the PROG letters appear in
the display.
In this mode temperature automatically is 7 ° c, and is often used in long
holidays to avoid problems of freezing pipes.
In this mode the radiator is automatically displaying the program made
by the user according to their needs with the temperature they selected.
In this economy mode the programmed temperature is automatically
selected at minus 3.5 ° C from comfort mode temperature.
The economy mode is used during the night or if you are out for a short
while. Avoiding heating up from low temperatures again.
