14
Removing the Transport and Stacker
Motor Assemblies (see Figure 14)
Unplug motor wires from two connectors located on
each side of chassis. Compress the belt tensioning spring
by pushing up on the stacker motor and gear case
assembly until the three locking tabs of the gear case can
be freed from their mating slots in the chassis. Remove
the stacker motor and gear case assembly along with the
tensioning spring. Slide the transport motor and gear case
assembly down until its three locking tabs are freed from
their mating slots on the chassis.
Removing the Chassis Belts and Pulleys
(see Figure 13)
Compress the belt tensioning spring by pressing down on
the transport motor and gear case assembly and remove
the belts. Slide the pulleys off the lower shafts to prevent
them from falling off.
SECTION 4: MAINTENANCE
Figure 14
Chassis Belt
Pulley
Belt Tension
Spring
Stacker Gearbox
& Motor Assembly
Transport
Assembly
Slots
Stacker
Assembly
Slots
Transport Gearbox
& Motor Assembly
Figure 13
Chassis
Belt
Chassis
Belt
Transport Motor
Assembly
Motor
Connector
